What is cold storage sliding door?

The main technical parameters are as follows:

① Cold storage translation door has two kinds of stainless steel and color steel plate.

② Using PU as the core material, fast opening and closing, special polyethylene sliding wheel, low temperature rubber seal, the main parts cast stainless steel, aluminum alloy guide accessories, bright and beautiful, corrosion and durable.

③ All steel fittings screws are galvanized, reinforced corrosion resistance, easy to open and close, internal and external switches, simple maintenance.

④ The low temperature warehouse door is equipped with imported electric heating wire, which will not freeze when it is -40°C.

⑤ The size is optional within 2500*3000 high, and the collision plate can be installed. The net size of the door width * height mm: (500-2500) * (1800-3000).

⑥ Open direction: can be left or right any one way. Steel plate material can be: stainless steel or color steel plate.

Note:

① can be installed anti-collision plate, the thickness of the door plate 50mm, 75mm, 100mm, 150mm, 200mm ②-10 ℃ below the installation of electric heating wire system, suitable for -40℃ ~ +65℃ thermal insulation warehouse

The design of the sliding door panel is very important, but the design of the sliding bearing is also crucial and should be paid great attention to. In the current door moving system in use, one of the best is to use the door's own weight to automatically jam when the door moves to the closed position. This design has nylon bearings mounted at the two corners of the door plate sliding in a track containing a 90° Angle and has special adjustable brakes. There are grooves in the track, and when the door is closed in place, the nylon wheel falls into the grooves to stop the door movement and form a good seal with the ground and the door frame. Since this action occurs when the door is in the closed position, it does not cause significant wear to the seal, unlike some systems where the slide gradually bends towards the door frame and threshold, and the door slopes against the door frame and continuously wears the seal. When manually operated, the handle is removed from the groove, and the door loses its sealing effect. Once the door is back on track, it can be easily closed. This reliable closing action prevents the door from opening slightly and causing a loose seal.